The Eight Most Common AC Failures and How to Prevent Them
The Most Common AC Failures that we see as a Professional HVAC Contractor
With hundreds of commercial and residential HVAC units inspected each year, our HVAC technicians constantly handle repair and maintenance calls. Over time, we have developed a list of the most common faults that we see in the field, and it is time to share it with you. In this blog, we'll look at the eight most common faults we see in air conditioner units and show how regular maintenance can help you avoid costly repairs down the line.
Blocked Drain Line
Air conditioner drain line blockages are among the most common issues we see. These lines move condensed moisture out of your unit and drain it from the system, but they often clog with algae or debris. Once the blockage builds up enough to restrict water flow, the system shuts down to prevent further damage and will not restart until the blockage is cleared.
Wire or Switch Burnout
During a high-heat event like a heat dome on an August afternoon, your electrical wires, switches, and terminals can run extremely hot and start to burn or fuse if they're worn, dirty, or have debris near them. Once electricity can't flow past the broken connection, the unit will automatically shut down until the connection is replaced. Typically, you will notice a burning smell, a humming sound, or a tripped circuit, which indicates an issue with the AC unit's electrical components.
Capacitor Failure
The most common issue that we see is a capacitor failure during operation. These small electrical parts give your AC unit the boost it needs to start and run the fan motor and compressor to cool your space, and they can fail over time. Your air conditioner has multiple capacitors, and when they fail, you may experience hot air, no airflow, or a unit that won't start.
Frozen Coils
Another common issue is a frozen coil, which can happen when your coils are dirty or you have a filter or fan issue. A frozen coil is ice buildup that can keep growing until the unit fails. Typically, you will not notice an issue until it is too late, and frozen coil damage can cause compressor issues, water damage, or increased wear and tear on the unit.
Pressure Spike
Pressure spikes can happen in any unit when the system can’t release heat or is dealing with a blockage in the refrigeration system. A pressure spike is typically caused by other issues, such as a burned-out fan, frozen coils, or an open valve. When a pressure spike occurs, the system will lock out to prevent further damage to the AC unit.
Electrical Disconnection
AC units are notorious for humming, vibrating, and loosening connections over time. The vibrations from normal operation can loosen wires, terminals, and nuts, causing the unit to shut off without warning when a component fails.
Faulty Contactor
Contactors are one of the most important parts of your AC system, as they control when your AC unit turns on and off. When your contactor faults out, it can cause one of two issues. First, if it is stuck in the on position, the unit won't start because no power reaches it. The second issue is if it is stuck in the closed position, which means that your unit will run continuously and will not turn off, even if the thermostat is signalling for the unit to shut down.
Refrigerant Leak
Refrigerant leaks are often slow and can develop over time if not caught early. As the refrigerant leaks, you'll notice a loss of cooling, and eventually your unit will fail. Some leaks are significant, and you will notice a sudden loss of cooling, especially if something or someone has damaged the refrigerant line.
Maintenance Services
So, you may be asking, how do I avoid these repairs? The answer is pretty simple: regular maintenance. On the residential side, we suggest booking an annual maintenance service in the Spring to see how the unit held up over the winter and tune it up ahead of the busy summer season, where we can check all your connections, wires and overall system health.
For our commercial clients, we suggest biannual maintenance visits to stay ahead of any damage that may have occurred over winter or summer, with visits in early spring and mid-fall before the weather starts to turn. These maintenance visits can help you spot issues before they become problems and save you money down the line, without spending hundreds or thousands of dollars on repairs.
So, if you want to avoid these eight most common AC unit failures, book an air conditioner maintenance visit with Fry today. Call us today to see how our HVAC experts can lower your risk of failure and keep your unit humming and cooling all summer long.
We're Listening | Get a free quote today!
Fry - Blog
We will get back to you as soon as possible.
Please try again later.












